Do you have a Ring Doorbell? If so, you may have noticed that the blue light starts flashing when it is charging. This can be a bit confusing, especially if you don’t know what to do. In this blog post, we will explain what the blue light means and how to properly charge your Ring Doorbell!
Introducing Ring Video Doorbells
Ring Video Doorbells are a smart home device that allow you to monitor your door from anywhere. They feature two-way audio, motion detection, and night vision, making them an ideal choice for keeping an eye on your front door.
When the Ring Doorbell is charging correctly, a blue light will start flashing on its face. This signifies that the battery is being charged and it’s ready for use. If the blue light doesn’t shut off after a few hours of being plugged in, this might be an issue with either the battery or charger.
What Does a Ring Doorbell Flashing Blue Mean?
When the Ring Doorbell’s blue light starts flashing, this usually indicates that the battery is charging correctly. The amount of time it takes to fully charge can vary depending on the battery capacity and type. Generally speaking, it should take a few hours to fully charge your device. If the blue light continues to flash after several hours of charging, then there could be something wrong with either the charger or the battery itself. It’s also important to note that if you’re using an older model charger, it may not be compatible with your newer Ring Doorbell. This could cause issues with charging and could even damage your device over time. 
Flashing Blue Light (1 second on and 1 second off)
If your Ring Doorbell’s blue light starts flashing on and off rapidly (1 second on, 1 second off), then this is a sign that the battery is overheating. This could be caused by an old charger or even due to it being in direct sunlight for too long. If you notice this happening, it’s important to stop charging the device immediately and let it cool down before attempting to charge again.
Spinning Blue Light
If the blue light starts to spin on your Ring Doorbell, then this is an indication that the device is having trouble pairing with your network. This could be caused by a weak Wi-Fi signal or even due to a problem with the router itself.
Solid Blue Light
A solid blue light on your Ring Doorbell means that the device is fully charged and ready to be used. Once this light turns off, then you can unplug the device from its charger and start using it again.
A flashing blue light on your Ring Doorbell typically means that it is charging correctly. If the light does not turn off after a few hours, or if it starts flashing rapidly (1 second on, 1 second off), this could be a sign of an issue with either the battery or charger. Taking corrective action immediately will help avoid any major issues in the future.
Upward Moving Blue Light
If your Ring Doorbell’s blue light starts to move up and down, then this usually means that the device is updating its firmware. This type of activity can take several minutes or even up to an hour, depending on how large the update is. During this time, it’s important not to disconnect the device from its charger as this could cause issues with the update process. The light will turn off to let you know that the update is complete.
Ring Video Doorbells are a great way to monitor your front door from anywhere in the world. If you find that your device has a flashing blue light when charging, then this usually indicates that everything is working correctly. However, if the light does not turn off after several hours, starts to flash rapidly (1 second on and 1 second off), or begins spinning, then it’s important to take corrective action immediately to avoid any major issues down the road. Additionally, if you notice an upward moving blue light, then this usually indicates that your device is updating its firmware. It’s important not to disconnect it from its charger during this time. In most cases, once the light turns off, you’ll know that the update has finished successfully.
Rapid Blue Lights Flashing then Turns White
If your Ring Doorbell’s blue light starts to rapidly flash and then turns white, this usually indicates that the device has successfully connected to a network. This is a good sign as it means that you’ll be able to use the device normally once the light turns off. Make sure to check if your doorbell is functioning properly at this point and contact customer support if there are any issues.
When charging your Ring Doorbell, it’s important to pay attention to the color of its indicator light. A flashing blue light usually means that everything is working correctly, though it could indicate other potential problems such as overheating or connection issues. If you detect any abnormal behavior with the blue light, taking immediate corrective action will prevent more significant problems from occurring later.
4 Blue LEDs Flashing 4 Times
If your Ring Doorbell’s blue light starts to flash four times, then this usually means that the device is resetting itself. This type of activity can take several minutes or up to an hour. During this time, it’s important not to disconnect the device from its charger as this could cause issues with the reset process. Once the light turns off, you’ll know that the reset has finished successfully.
Ring Video Doorbells are a great way to monitor your front door from anywhere in the world. If you find that your device has a flashing blue light when charging, then it’s important to pay attention to its behavior and determine what kind of issue you may be facing. Flashing slowly usually indicates that everything is working correctly, though a rapid flashing pattern or four blue LEDs flashing four times could point to other potential problems. It’s important to take corrective action immediately if you notice any abnormal behavior with the blue light to avoid major issues down the road.
How to Fix a Ring Doorbell with Continuous Blue Flashing Light
If your Ring Doorbell’s blue light is continuously flashing and won’t turn off, then this usually indicates that the device is having difficulty connecting to a network. To fix this issue, try disconnecting the Ring Doorbell from its charger for 30 seconds before reconnecting it again. This should reset the device and enable it to connect to a network normally. If this doesn’t work, then you may need to contact customer support for further assistance.
Other Issues that Affect Ring Doorbell
In addition to the flashing blue light issue, there are a number of other potential problems that can affect Ring Doorbells. These include overheating, connection issues, low battery levels and more. If you find that your device is experiencing any of these issues, then it’s important to take corrective action immediately to avoid any major issues down the road.
One of the most common issues that can affect Ring Doorbells is a Wi-Fi connection issue. If your Ring Doorbell is having difficulty connecting to a network, then it’s important to make sure that you’re in range of the router and that there are no obstructions blocking the signal. Additionally, you should also ensure that your router’s settings are configured properly and that your device has sufficient battery levels before attempting to connect.
How to Know if You Have Weak Wi-Fi Signal
If you’re unsure if your Ring Doorbell is receiving a weak Wi-Fi signal, then there are a few ways to check. One way is to open the app and look for an icon or message indicating that your device has a weak connection. You can also use the Wi-Fi strength meter on your router or other devices in order to get an accurate reading of the signal strength in the area.
Another issue that can affect Ring Doorbells is power related. If your device isn’t receiving sufficient power from its charger, then it may start to behave erratically or display a flashing blue light when charging.If your Ring Doorbell isn’t working, try disconnecting it from the charger for thirty seconds and then reconnecting it. This should reset the device and enable it to charge properly.
Ring Doorbell Flashing Blue Light When Charging: Troubleshooting and Solutions
If you notice your Ring Doorbell flashing a blue light while charging, there could be various reasons for this behavior. To help you address the issue and ensure proper charging, we’ve outlined potential solutions and troubleshooting steps below.
|Charging Status||The blue light indicates that the Ring Doorbell is actively charging.||Confirms that the device is properly connected and receiving power.|
|Power Source||Ensure the USB cable and power source are functional and properly connected.||Addresses potential issues with power supply and connectivity.|
|USB Cable||Check if the USB cable is damaged or incompatible and replace if necessary.||Ensures proper power transmission and charging efficiency.|
|Reset||Perform a soft reset by pressing and holding the reset button on the back of the doorbell.||Resolves temporary software glitches that might affect charging behavior.|
|Weather Conditions||If exposed to extreme temperatures, bring the doorbell indoors for charging.||Prevents adverse weather conditions from affecting the charging process.|
|Device Placement||Ensure the device is securely placed on the charging mount.||Prevents accidental disconnection during charging.|
Explanation of the Table:
- Charging Status: The flashing blue light indicates active charging, providing visual confirmation.
- Power Source: Ensuring a functional power source and proper connections addresses power supply issues.
- USB Cable: Checking and replacing a damaged or incompatible USB cable ensures efficient charging.
- Reset: Performing a soft reset can resolve software-related glitches affecting charging.
- Weather Conditions: Protecting the device from extreme temperatures prevents charging issues due to weather exposure.
- Device Placement: Secure placement on the charging mount prevents accidental disconnection.
Following these troubleshooting steps can help you address the issue of your Ring Doorbell flashing a blue light while charging, ensuring proper charging and functionality.
Do you have to pay every month for a Ring Doorbell?
No, you do not have to pay a subscription fee for Ring Doorbell. However, some of the features may require a paid subscription in order to be used. 
Do Ring cameras work without Wi-Fi?
No, Ring cameras require a Wi-Fi connection to function properly. Without an active internet connection, the device will not be able to connect to the Ring servers and enable certain features like motion detection and notification alerts.
Can someone disable my Ring camera?
No, it is not possible for someone to physically disable your Ring camera. However, they may be able to gain access to your Wi-Fi network and disrupt the connection using malicious techniques. In order to prevent this from happening, you should make sure that you use a strong password and encrypt your Wi-Fi network. 
Do Ring cameras record all the time?
No, Ring cameras do not record all the time. They are designed to only start recording when motion is detected or when you manually initiate a recording session. This ensures that your device is not constantly consuming resources and battery life while it is idle. 
How long does it take for the Ring Doorbell’s blue light to stop flashing during charging?
The time it takes for the blue light to stop flashing depends on the current charge level of your Ring Doorbell’s battery and the charging rate. Typically, it can take a few hours for the battery to charge fully, after which the flashing blue light should stop.
Is there an issue if the blue light continues to flash for an extended period while charging?
If the blue light continues to flash for an extended time, it might indicate an issue with the charging process. Ensure that the charging cable and connection are secure, and try using a different power source or cable if the issue persists.
Can I use my Ring Doorbell while the blue light is flashing and it’s charging?
Yes, you can still use your Ring Doorbell for its regular functions while it’s charging and the blue light is flashing. The charging process doesn’t affect the device’s usability.
Will the blue light keep flashing if the Ring Doorbell’s battery is fully charged?
No, once the Ring Doorbell’s battery is fully charged, the blue light will stop flashing and remain solid or turn off, depending on the device’s current status.
Should I be concerned about overcharging the battery if the blue light keeps flashing?
No, you don’t need to worry about overcharging the battery. Ring Doorbell devices are designed to prevent overcharging, and the charging process is automatically managed to ensure the battery’s health.
What should I do if the blue light doesn’t stop flashing even after a reasonable amount of time?
If the blue light continues to flash longer than expected, double-check the charging cable, power source, and connection. If the issue persists, you might want to contact Ring’s customer support for further assistance.
Can I adjust the settings to stop the blue light from flashing during charging?
The flashing blue light during charging is a default indicator and cannot be adjusted through settings. It’s designed to inform you about the charging process and battery status.
Is the blue light’s behavior the same for all models of Ring Doorbell?
The behavior of the blue light during charging is consistent across most models of Ring Doorbell. However, for the most accurate and up-to-date information, it’s recommended to refer to the user manual specific to your device model.
Will the blue light flashing affect the motion detection and alerts of the Ring Doorbell?
No, the blue light flashing during charging does not impact the motion detection and alert functions of your Ring Doorbell. The device will continue to function as usual, providing motion alerts and recording events when triggered.
Useful Video: Why is Ring Doorbell Flashing Blue? [why is my ring doorbell blinking blue]
If your Ring Doorbell is flashing blue while it’s charging, don’t panic! This is a normal and necessary part of the charging process. Just make sure to keep an eye on your doorbell and give it plenty of time to charge so you can be sure it will work when you need it. Thanks for reading and we hope this article was helpful. Let us know in the comments if you have any questions or if there are any other topics you’d like us to cover.